Voltmeter & Ammeter

Posted in Secondary Meters

Compact and tough Voltage and Current bench meters with protective display ideally angled for student viewing.

Pause feature allowing display to hold  measured value. 

Smartpower Technology saves the life of the internal batteries. Powers off if no load detected after 2 minutes and stays on for 1.5 hours if a load is detected on the input.

Self-check function of the internal batteries voltage level along with low battery voltage warning allows batteries to be changed  before they run flat.

Horizontal 4mm input sockets have been placed on the rear of each unit allowing convenient bench use.  This allows easy to see circuit position of meters with wires laying flat on the bench.

Display has been designed to be clear and bright with Voltmeter display in Green and Ammeter display in Red to aid differentiation.

Designed and manufactured in the UK.

Key points:

Voltmeter range 0 – 20 Volts (2 decimal places). Accuracy: +/- 0.5%

Ammeter range 0 – 10 Amps (2 decimal places). Accuracy: +/- 1.5%

Colour displays to distinguish between Voltmeter (Green) and Ammeter (Red)

Large bright LED displays for each meter

Colour coded 4mm input sockets mounted horizontally to allow cables to lay flat

Tough ABS case

Display size 32 x 19mm

Unit size 130 x 90mm

Rear height 40mm, front height 15mm allowing perfect student viewing angle

Powered by 2 x AA batteries (included) 

SmartPower Technology – Manages its internal batteries to extend life and performance