Meter Logging
• Autolog – just press “Start” to start logging and “Stop” to stop
• Set Log Rate – set the experiment duration and sample rate
• Snapshot – store the sensor readings every time the “Store” button is pressed
• Triggered – starts logging when an event happens, such as dropping a magnet through a coil
Recommended accessories
o Light Level D100159
o Temperature D100047
o Sound Level D100060
Timing
Using either Single, Double or Picket Fence interrupt cards
• Time at A
• Time at A and B
• Time from A to B
• Time at A, from A to B, and B
• Speed at A
• Speed at A and B
• Speed from A to B
• Acceleration at A
• Simple Harmonic Motion
• Stopwatch / Timer
Recommended accessories
o Light Gate Set D100054 contents
2 x Light Gate Vision, with visible light beam
2 x Mounting rod 120mm x 10mm diameter
2 x Mounting Screws
o Timing card set D101130 contents
1 x single,
1 x double
1 x picket fence
o Pressure Mat Set D100094 contents
2 x Pressure mats
Oscilloscope
• 1 or 2 Channel
• Time base 20us to 100ms / Div
• Y scale auto zooms to make full use of the display
• Hold and Save waveform
• ADC 12 bit resolution
• Auto triggers to waveform
Recommended accessories
o Sound Wave x 2 D100060
o Light Level D100159 Smart Eye sensor
o Voltage measurement set D100045 (+/- 25v lead, 15 piece test lead set)
o +/- 1250mv (Redox adapter) D100139
o Pulse Monitor D100092
Technical
• Power - 2 x AA or USB when connected
• Display - low power backlit 128 x 64 monochrome LCD, designed for indoor and outdoor use
• Connectivity – USB and Low power Bluetooth
• Sensor Socket – 4 x microsense
